Thrust

THRUST Hub Series

PGM_0049-Edit-Edit

This particular internal system assures 3 pawls engage while the other series of 3 pawls wait to engage. Drag has been reduced with fewer engagement points. Pawl life expectancy is also increased.

PGM_0038dia

  • 6 Pawls
  • 51 Tooth Engagement Ring
  • 102 Engagement Points  
  • 3.53 Degrees of Engagement

The Thrust hub utilizes a massive thrust bearing that permits rotation between the shell & the cog carrier/driver while supporting axial load, which makes for a dreamy smooth rotation. For the most part the entire series of Thrust hubs can be disassembled mostly without tools, allowing for easy access to maintain the hub(s). Guards press-on. Over sized bearings throughout.

Available in

  • 14 mm RHD 9t rear w/extended axle
  • 15 mm thru axle rear w/16t cog (Shimano lock-ring system)
  • 3/8″ bolt-on rear w/16t cog (Shimano lock-ring system)
  • 3/8″ bolt-on front (Hex bolt for street/ Allen bolt for race)

Press-on Hub Guards for easy install available for front and rear Thrust Hub(s)

14 mm RHD or LHD 9t rear

  • Details: 6 Pawls, 3.53 Degrees of Engagement, 2 Independent Series of 3 Pawls
  • Shell: 6061 T6
  • Axle: Cr-Mo 15 mm female hollow w/a machined 14 mm 3 mm extension plus 3/8” hardware; Steel (SCM 440) end cap with knurling
  • Bearing: Stainless sealed cartridge bearings
  • Holes: 36
  • Drive: 9t ½ x 1/8, RHD or LHD
  • Colors: Black
  • Pitch Center Diameter: Non-Drive 45 mm Drive-Side 63 mm
  • Drive-Side Center to Flange: 32.56 mm
  • Non-Drive Side Center to Flange: 34.54 mm
  • Weight: 482 grams / 17 oz.
  • Optional: Press-fit half guard, 48 grams / 1.7 oz.

15 mm Thru Axle 16t rear

  • Details: 6 Pawls, 3.53 Degrees of Engagement, 2 Independent Series of 3 Pawls
  • Shell: 6061 T6
  • Axle: 7075 T6 15 mm hollow sub-axle
  • Bearing: Stainless sealed cartridge bearings
  • Holes: 36
  • Drive: RHD
  • Cog: Anodized 7075 T6, 13 – 18 tooth (Shimano lock-ring system)
  • Colors: Black
  • Pitch Center Diameter: Non-Drive 45 mm Drive-Side 63 mm
  • Drive-Side Center to Flange: 32.56 mm
  • Non-Drive Side Center to Flange: 34.54 mm
  • Weight: 340 grams less thru-axle / 12 oz.
  • Optional: 149 mm thru-axle, 72 grams / 2.5 oz.

3/8” Bolt-On 16t rear

  • Details: 6 Pawls, 3.53 Degrees of Engagement, 2 Independent Series of 3 Pawls
  • Shell: 6061 T6
  • Axle: 7075 T6 15 mm hollow axle
  • Bearing: Stainless sealed cartridge bearings
  • Holes: 36
  • Drive: RHD
  • Cog: Anodized 7075 T6, 13 – 18 tooth (Shimano lock-ring system)
  • Colors: Black
  • Pitch Center Diameter: Non-Drive 45 mm Drive-Side 63 mm
  • Drive-Side Center to Flange: 32.56 mm
  • Non-Drive Side Center to Flange: 34.54 mm
  • Weight: 440 grams, included bolts & 16t cog / 15.5 oz.

3/8” Bolt-On race front  

  • Details: Small flange, press fit system
  • Shell: 6061 T6
  • Axle: 7075 T6 15 mm hollow axle
  • Bearing: 6902 LB Stainless sealed cartridge bearings
  • Holes: 36
  • Colors: Black
  • Pitch Center Diameter: 45 mm
  • Center to Flange: 29 mm
  • Weight: 220 grams with hardware / 7.8 oz.

3/8” Bolt-On street front

  • Details: Small flange, press fit system
  • Shell: 6061 T6
  • Axle: 3/8” Cr-Mo 15mm hollow
  • Bearing: 6902 LB Stainless sealed cartridge bearings
  • Holes: 36
  • Colors: Black
  • Pitch Center Diameter: 45 mm
  • Center to Flange: 29 mm
  • Weight: 230 grams with hex bolts / 8.1 oz.
  • Optional: Press-fit full guard, 42 grams / 1.5 oz.